Details

---

Features & Specifications :
 

Product specifications	HE generator 20/35kHz
Power supply	190-265V, single phase, 50-60Hz
Size	Height 370×Width 127XLength 415mm
Weight	20kHz 2000&3000W: 8.0kg 35kHz 900W: 7.5kg
Electrical box color	RAL 3020 red
Display	4 lines x 20 characters LCD screen, with backlight
LED light stick	20 LEDs display the peak value of welding output
LED	4 LED lights to show the status of the electric box
Keyboard	26 buttons (including ON/OFF button)
Microgenerator	16-bit/20MHz
Microprocessor	16-bit/16MHz
Analog/Digital Signal Converter	12 bits
Power measurement	Real time
Frequency range	20kHz: 19700-20150Hz 35kHz: 34700-35150Hz
Automatic FM	Real-time, can automatically adjust to the normal frequency range
Power loss measurement	Optional before welding, after welding, close this function
Stroke measurement	Real time, error ±0.01mm
Rated output power	20kHz: 2000/3000W 35kHz: 900W
Maximum output power	10% greater than rated output power
Internal amplitude	Adjustable range 60%-100% (unit 5%)
External amplitude	Adjustable range 60%-100% (unit 5%)
Amplitude measurement	External measuring sensor (optional)
Operating mode	Time/energy/ultrasonic stop vibration/power/stroke mode, etc.
Time pattern	The setting range is 0.005-9.999s
Energy pattern	The setting range is 0-99999.99Ws
Ultrasonic vibration stop mode	Built-in
Trip mode	The setting range is 0-500.00mm, with an error of ±0.01mm
Power mode	Adjustable range 0-100%
Limit value mode	The required energy/time/power/stroke/number of workpieces can be set
Pressure trigger start	Adjustable range 0-6.5bar/sensor 4-20mA
Time triggered start	The setting range is 0-9.999s
Proportional valve analog signal	Adjustable range 0-10V
Multi-stage pressure setting (used with proportional valve)	5 levels of pressure setting
Power output controller	Adjustable range 0-5V
Press controller	Two-hand start switch & compressor air pressure
Counter	The setting range is 0-999999999
Stroke deceleration control	Adjustable range 0-500mm
Internal power supply	24VDC/400mA with voltage regulation and short circuit protection
Enter	Optocoupler 20-28VDC/max.7mA
Output	Optocoupler 22-26VDC/max.250mA, with short-circuit protection
Emergency stop	Screen display message
Error message displayed	Screen display/hardware output
PLC communication interface	Various digital input and output signals
PC communication interface	RS232, data can be exported
Database	Can store up to 99 sets of welding parameters
External selection database	4xDigital/16xDigital HEX/RS232 interface
Software updates	BDE interface
Buzzer	A sound will be emitted when the keyboard confirmation key is pressed and an error message appears
Test program (service program)	All input and output signal hardware tests
Connecting plug	All are D-sub
Pin password	4-digit lock code to prevent parameter settings from being modified at will
Main power switch	Back of electrical box
Menu language	English/German/Spanish/French/Italian etc.
Suitable temperature	Operating temperature -5°C~45°C / Storage temperature -20°C~60°C
Design and manufacturing place	Switzerland

---