Details

---

Model : HG-KN23J
 

---

Specifications :
 

Mitsubishi Servo motor model HG-KN	23J
Mitsubishi MELSERVO-JE Servomotor	Refer to “Combinations of Servo Motor and Servo Amplifier” on p. 2-1 in this catalog.
Power supply capacity *1 [kVA]	0.5
Rated output [W]	200
Rated torque (Note 3) [N・m]	0.64
Maximum torque [N・m]	1.9
Rated speed [r/min]	3000
Maximum speed [r/min]	5000
Permissible instantaneous speed [r/min]	5750
Rated current [A]	1.3
Maximum current [A]	3.9
Regenerative braking frequency *2, *3 [times/min]	(Note 5)
Recommended load to motor inertia ratio (Note 1)	15 times or less
Combination with MR-JE-B	Absolute/incremental 17-bit encoder (resolution: 131072 pulses/rev)
Combination with MR-JE-A	Incremental 17-bit encoder (resolution: 131072 pulses/rev)
Oil seal	Installed. Without oil seal is also available.
Insulation class	130 (B)
Structure	Totally enclosed, natural cooling (IP rating: IP65) (Note 2)
Ambient temperature	Operation: 0 °C to 40 °C (non-freezing), storage: -15 °C to 70 °C (non-freezing)
Ambient humidity	Operation: 80 %RH maximum (non-condensing), storage: 90 %RH maximum (non-condensing)
Ambience	Indoors (no direct sunlight); no corrosive gas, inflammable gas, oil mist or dust
Altitude	1000 m or less above sea level
Vibration resistance *5	X: 49 m/s2 Y: 49 m/s2
Vibration rank	V10 *7
Compliance to global standards	Refer to “Conformity with global standards and regulations” on p. 19 in this catalog.
Standard (kg)	0.98
With electromagnetic brake (kg)	1.4