Details
Model : GS2107-WTBD-N
Features :
| Display Section | Model Number | GS2107-WTBD-N |
| Display Device | TFT color LCD | |
| Screen Size | 7" | |
| Resolution | 801 x 480 dots | |
| Display Size (W x H) mm (inch) | 154 x 85.9 (6.06 x 3.38) (Horizontal format) | |
| Number of Characters | 16-dot standard font: 50 chars. x 30 lines (2-byte) (Horizontal format) | |
| Display Color | 65536 colors | |
| Backlight | LED (not replaceable) Backlight off/screen saving time can be set | |
| Touch Panel | Type | Analog resistive film |
| Key Size | Minimum 2 x 2 dots (per key) | |
| Simultaneous Press | Simultaneous press prohibited (only 1 point can be pressed) | |
| Life | 2 million times (operating force 0.98N or less) | |
| Memory | C Drive | Flash memory (internal) (9MB), for storing project data, OS Life (No. of writings) 100000 times |
| Built-in Interface | RS-422 | RS-422, 1ch |
| Transmission speed: 115200/57600/38400/19200/9600/4800bps | ||
| Connector shape: D-Sub 9pin (female) | ||
| Application: For communication with controllers | ||
| Terminating resister: 330 Ω fixed | ||
| RS-232 | RS-232, 1ch | |
| Transmission speed: 115200/57600/38400/19200/9600/4800bps | ||
| Connector shape: D-Sub 9pin (male) | ||
| Application: For communication with controllers and a barcode reader | ||
| For connecting a personal computer (Project data read/write, FA transparent function) | ||
| Ethernet | Data transfer method: 100BASE-TX, 10BASE-T, 1ch | |
| Connector shape: RJ-45 (modular jack) Application: For communication with controllers | ||
| Application: For connecting a personal computer (Project data read/write, FA transparent function) | ||
| For connecting a personal computer (Project data read/write, FA transparent function) | ||
| USB | USB (Full Speed 12Mbps), 1ch | |
| Connector shape: Mini-B | ||
| Application: For connecting a personal computer (Project data read/write, FA transparent function) | ||
| SD Card | SD compliant, 1ch | |
| Supported memory card: SDHC memory card, SD memory card | ||
| Application: Project data read/write, logging data save | ||
| Buzzer Output | Single tone (LONG/SHORT/OFF adjustable) | |
| Protective Structure | IP65F (Only the front part of the panel) | |
| Ext. Dimensions (W x H x D) mm (inch) | 206 x 155 x 50 (8.11 x 6.11 x 1.97) | |
| Weight (Excl. Mounting Brackets) (kg) | 0.9 | |
| Compatible Software Package | GT Designer3 Version1.105K or later (*1) (English Version) | |
Dimensions :
Specifications :
| Screen Size | 7" WVGA |
| Display Section | TFT color |
| Display Color | 65536 colors |
| Panel Color | Black |
| Power Supply Voltage | 24VDC (+10%,-15%), ripple voltage 200mV or less |
| Power Consumption | 6.5W (271mA/24V) or less |
| With Backlight Off | 3.8W (158mA/24V) or less |
| Inrush Current | 17A or less (6ms, ambient temperature 25, maximum load) |
| Allowable Momentary Power Failure Time | Within 5ms |
| Noise Immunity | Conforms to IEC61000-4-4, 2kV (power supply line) |
| Withstand Voltage | 350VAC for 1 minute between power supply and ground |
| Insulation Resistance | 10ΜΩ or higher with an insulation resistance tester (500VDC between power supply terminal and ground) |
Parameters :
| Item | Specifications | |||||
| Operating Ambient Temperature | 0 to 55° | |||||
| Storage Ambient Temperature | -20 to 60° | |||||
| Operating/Storage Ambient Humidity | 10 to 90%RH, non-condensing (The wet bulb temperature is 39°) When the ambient temperature exceeds 40°, maintain the absolute humidity at 40° and 90% |
|||||
| Vibration Resistance | Conforms to IEC 61131-2 | Conditions | Frequency | Acceleration | Half-Amplitude | Sweep Count |
| Under intermittent vibration | 5 to 8.4Hz | - | 3.5mm | 10 times each in X, Y and Z directions | ||
| 8.4 to 150Hz | 9.8m/s² | - | ||||
| Under continuous vibration | 5 to 8.4Hz | - | 1.75mm | - | ||
| 8.4 to 150Hz | 4.9m/s² | - | ||||
| Shock Resistance | Conforms to IEC 61131-2 (147m/s², 3 times each in the X, Y, and Z directions) | |||||
| Operating Atmosphere | Must be free of lamp black, corrosive gas, flammable gas, or excessive amount of electro conductive dust particles. Must be no direct sunlight. (Same as for saving) |
|||||
| Operating Altitude (*1) | 2000m or less | |||||
| Overvoltage Category (*2) | II or less | |||||
| Pollution Degree (*3) | 2 or less | |||||
| Cooling Method | Self-cooling | |||||
| Grounding | Type D grounding (1000 or less). Connect to panel if unable to ground. | |||||
1. Do not use or store the GOT under pressures higher than the atmospheric pressure of altitude 0m (0ft). Failure to observe this instruction may cause a malfunction. When the air inside the control panel is purged by pressurization, the surface sheet may be lifted by high pressure. As a result, the touch panel may be difficult to press, and the sheet may be peeled off.
2. This indicates the section of the power supply to which the equipment is assumed to be connected between the public electrical power distribution network and the machinery within the premises. Category II applies to equipment for which electrical power is supplied from fixed facilities. The surge voltage withstand level for up to the raged voltage of 300V is 2500V.
3. This index indicates the degree to which conductive pollution is generated in the environment where the equipment is used. In pollution degree 2, only non-conductive pollution occurs but temporary conductivity may be produced due to condensation. Do not use or store the GOT under direct sun light or in an environment with excessively high temperature, dust, humidity or vibration. For inquiries relating to the status of conforming to UL, cUL, and CE directives and shipping directives, please contact your local sales office.
View more about Mitsubishi HMI 7 inches Touch Screen GS2107-WTBD-N on main site